QZC50-80/120-CWF Thermoformer
Nkọwa igwe
I, Akụkụ
01. Mechanical, pneumatic na eletriki Nchikota.Omume niile na-arụ ọrụ bụ PLC na-eji ihuenyo mmetụ na-achịkwa, dị mfe ma dị mma na arụ ọrụ.
02. Servo moto nri, nri ogologo na-steplessly gbanwee, nke bụ ngwa ngwa na ezi.(Max.speed:1000mm/s)
03. Heater na ọgụgụ isi okpomọkụ akara usoro nwere ike na-akpaghị aka na-enye ndị kpo oku onye kpo oku akara, nke bụ adaba n'ihi na okpomọkụ si uniformity.This usoro nwere uru nke mfe na-arụ ọrụ, adaba, ngwa ngwa kpo oku(naanị 5 min si 0-400degree), ike (merie'). A ga-eme ya site na voltaji dị n'èzí, mgbanwe okpomọkụ bụ ihe na-erughị 1 ogo), na-azọpụta ike (ihe dị ka 15%) na ogologo ndụ nke ojiji nke firebacks.
04. ] Igwe ọkụ abụọ (elu na ala) na mpempe akwụkwọ pro-heat akụrụngwa.
05. Na mpempe akwụkwọ na-edobe nchọpụta na ihe nchebe.
06. Akwụkwọ ego tupu oge eruo.Igwe ahụ nwere ọrụ nchekwa na-akpaghị aka nke oge kpo oku iji mee ka igwe ahụ nweta ọnọdụ ọrụ nkịtị na mmalite.
07. ebu igbu oge.
08. The akpụ elu na ala ebu na-eji pneumatic abụọ ikiaka usoro na ndu bushing na-eji inlay bearing na siri ike mmanu (JFB) na-eme ka elu na ala ebu na-arụ ọrụ stably na n'ụzọ ziri ezi.The ebu clamping ike bụ nnukwu na mma maka imeziwanye àgwà nke ngwaahịa.
09. Heater na-akpaghị aka na-atụgharị ọrụ na-eme ka o kwe omume ikpochapụ na na igwe na-enweghị ịkpụ mpempe akwụkwọ n'oge usoro mmepụta, wee chekwaa mpempe akwụkwọ.
10 .The elu na ala ebu na-eji eletriki emezi usoro, bụ nnukwu ọsọ na adaba.
11. Na ngwa ngwa mgbanwe ebu akụrụngwa, pneumatically clamping.
12. The elu ebu akwadebe nnyemaaka na-agbatị ikuku cylinder na ala ebu equips nnyemaaka demoulding ikuku cylinder.
13. The akpụ nwere ọtụtụ ụdị a ga-ahọrọ --- agụụ na-akpụ, nrụgide akpụ, agụụ na nrụgide akpụ.
14. Mpempe akwụkwọ mpịakọta na-akpaghị aka, mee ka ike ọrụ dị mfe.
II, Nka nka
| Oke | QZC50-80/120-CWF (Ụdị No.) | |
| Mpempe akwụkwọ dị (mm) | 500-760 | |
| Ọkpụrụkpụ mpempe akwụkwọ (mm) | 0.3-1.5 | |
| Max.dia.akwụkwọ mpịakọta (mm) | 600 | |
| Ọrịa strok dị elu (mm) | 130 | |
| Ọrịa strok ebu ala (mm) | 130 | |
| Mpaghara akpụ oke (mm2) | 720×750 | |
| Ogologo kacha elu (mm) | 70 | |
| Omimi kacha elu (mm) | 100 | |
| Ike ( okirikiri/nkeji) | 6-16 | |
| Isi iyi gas | Ikuku ikuku (m3/min) | ≥3 |
| Nrụgide(MPa) | 0.8 | |
| Oriri mmiri | 4-5 Cube/Hour | |
| Mgbapu mgbapụta | Busch R5 0100 | |
| Ike | 380V/220V 50Hz | |
| Ike ikpo ọkụ (Kw) | 86.4 | |
| Ike moto (Kw) | 8 | |
| Ike izugbe (Kw) | 96 | |
| Akụkụ (L×W×H)(mm) | Ihe dịka 7500×1800×2300 | |
| Ibu (Kgs) | Ihe dịka 7800 | |
III, Akụrụngwa nka
| PLC | Taiwan Delta |
| Ihe nleba anya ihuenyo mmetụ (10.4 inch / Agba) | Taiwan Delta |
| Moto na-enye nri (4.5kw) | Taiwan Delta |
| Igwe ọkụ | Germany |
| Onye na-achịkwa voltaji siri ike | China |
| Onye kọntaktị | Germany Siemens |
| Thermo relay | Germany Siemens |
| Ntugharị | Germany Weidmuller |
| Mgbapu mgbapụta | Busch R5 0100 |
| Pneumatic | Japan SMC |
| Silinda | China |
Foto onyonyo
Foto akpa
